Grinding wheel - from appearance to material
Good uniformity appearance and no cracks are the basic appearance of high-quality grinding wheels. Excellent packaging and printing anti-counterfeiting barcodes are genuine identification marks. The lower the static balance resin of any grinding wheel, the better. Of course, the greater the difficulty of production, the better. The general rule of cutting and grinding is that the amount of iron to be removed is small, the wear is low, the grinding wheel is too hard, the amount of iron to be removed is small, the abrasion is large, the material is too bad, the quality of the inner quality is as little as possible, the maximum amount of iron removal, and the feel at the same time. it is good.
The grinding wheel is quite picky for all kinds of materials. Because of their different tissue density and heat condition, it determines the difference between the grinding wheel. For the glass stone, there are special glass stone cutting and polishing tools on the market; copper and aluminum and stainless steel solid. The material is applied with a lower thickness or a zirconium corundum-based cutting or grinding sheet; for cutting carbon steel and stainless steel profiles (non-solid), the use of a higher hardness grinding wheel will greatly improve the life; but for solid round steel Forgings require that the grinding wheel should not be too high in hardness, otherwise it will not cut.