Super-thin diamond grinding wheel, which is a unique process, after the selection of diamond powder by metal method and then made. Therefore, it is able to conduct grooves cutting for all kinds of hard and brittle materials, such as silicon wafer, germanium, glass, ferrite, lithium tantalate, lithium niobate, gallium phosphide, gallium arsenide, gallium arsenide, ceramics and so on. It can be seen that it has a very strong toughness and high precision and super-thin characteristics.
The so-called super-thin diamond grinding wheel series has a thin ring, so the flange of appropriate size can be selected for use. Then, if the edge is worn or the whole edge of the circle is knocked out after use, the smaller flange can be replaced after dressing and continue to be used, which can be seen as very economical. And this diamond grinding wheel only needs to use the precision flange, you can get the best cutting effect.
Operating conditions of diamond grinding wheel:
1. The cutting speed must be greater than 80 m/s;
2. The cutting depth shall be determined according to the thickness of the grinding wheel and the cutting material.Generally, the maximum cutting depth is within 3 mm.
3. The cutting must be cooled with water, and the cooling water flow shall not be less than 2.4 litres/min;
4. The normal cutting speed (the moving speed of the cut) is determined according to the requirements of cutting materials and cutting accuracy, generally within 0.5-200 mm/second;
5. The cutting edge must be corrected with a special correction board before use.
6. When selecting diamond grinding wheel, in order to ensure the best cutting effect, it is possible to select corresponding abrasive particle grinding wheel according to different cutting materials.
Henan Sanders Trade Co., LTD is a specialized manufacturer of abrasive products and abrasive machine. Our company products mainly include flap disc, flap wheel , flower flap disc, mounted wheel, wire flap wheel, abrasive cloth and glass fiber backing plate.