The requirement of cutting technology is higher and higher, the requirement of super-thin saw blade and ultra-thin cutting blade is higher.Then super-thin saw blade and cutting blade in the use of the process of attention to those?
1. Please check carefully before installing the cutting wheel. If there is a notch or other damage, please stop using it.
2. When the rotation direction of the cutting wheel is marked, it should be consistent with the rotation direction of the machine. On the contrary, the cutting is not sharp and it is difficult to develop the performance of the cutting wheel.
3. Please do not use the cutting wheel that does not meet the requirements.
4. If any abnormality is found in the cutting process, the machine should stop immediately and the cause should be investigated.
5. When the cutting is not sharp, the grinding wheel should be trimmed and edged.If it continues to be used, the grinding wheel may be damaged due to overheating and overload.
6. When the grinding wheel is turning, it is strictly prohibited to cut by hand, let alone to touch the sand with hand or body
7. The cutting wheel is strictly prohibited to be used for cutting grooves or cutting off other operations to avoid unnormal operation due to uneven force.
cutting wheel for drill,metal cutting discs,cutting wheel 4 inch
Processing range of cutting sheet:
1, carbide cutting, cutting all kinds of profiles;
2, glass steel, glass fiber cutting;
3, marble, granite, quartz stone cutting;